Chicago · permit B101045011

4104 N BELL AVE

EV WALL CONNECTOR 1. FURNISH AND INSTALL (1) 60 AMP, 240 VOLT, 3 WIRE DEDICATED CIRCUIT. 2. PROPOSAL INCLUDES USING THE EXISTING 1" CONDUIT. INSTALL (1) 3/4" RIGID EMT CONDUIT INSTALLED FROM THE 1" JUNCTION BOX IN THE GARAGE TO THE NEW EV CHARGER. CONDUIT WILL BE SURFACE MOUNTED IN THE GARAGE. FINISH THE RUN WITH 1" CONDUIT INSIDE IF THE HOUSE. 3. CIRCUITRY WILL CONSIST OF (2) #6 AWG THHN COPPER CONDUCTORS AND (1) #10 AWG THHN GROUNDING CONDUCTOR. 4. INSTALL (1) CUSTOMER FURNISHED EV WALL CHARGER. WALL CONNECTOR WILL BE LOCATED ON THE SIDE GARAGE WALL. 5. CHARGER WILL DELIVER UP TO 48 AMPS. 6. FURNISH AND INSTALL (1) DISCONNECT SWITCH AS REQUIRED BY CODE. DISCONNECT SWITCH WILL BE INSTALLED NEXT TO THE WALL CONNECTOR. 7. FURNISH AND INSTALL (1) 60 AMP 2 POLE BREAKER IN THE MAIN PANEL TO FEED THE WALL CONNECTOR. 8. PROVIDE (1) LOAD CALCULATION FOR THE HOUSE INCLUDING THE NEW CHARGER. 9. FURNISH AND INSTALL (2) 20 AMP CIRCUITS TO FEED THE GARAGE. THE GARAGE CIRCUITRY WILL BE MOVED TO