Chicago · permit B100910504

7809 S KENTON AVE

SCOPE: - ON THE SERVICE ENTRANCE CONDUIT IN THE MSP INSTALL REDUCING BUSHINGS WITH LOCK RINGS ON BOTH SIDES. INSTALL A BONDING BUSHING ON THE SERVICE ENTRANCE AND BOND WITH GROUND WIRE - REPLACE THE LB ON THE SERVICE ENTRANCE CONDUIT NEXT TO THE METER WITH A MOGUL TYPE LB. - CHECK THE INSIDE OF THE METER AND MAKE SURE THERE IS A BOND BUSHING, IF NOT INSTALL ONE AND BOND. - SECURE THE SERVICE ENTRANCE CONDUIT TO THE HOME. - THERE IS A PIECE OF BX THAT GOES IN TO THE HOME NEXT TO THE SERVICE ENTRANCE FOR THE GARAGE FEED, THE BX STOPS AT THE WALL AND THEN IT'S JUST BARE WIRE GOING INTO THE MSP THAT WILL NEED TO BE PIPED OUT - FINISH THE CONDUIT FROM THE METER TO THE FIRST GROUND ROD. (3/4" RMC PULL GROUND (#8 GREEN) AND TERMINATE. (ENSURE THERE ARE BOND BUSINGS ON THE CONDUIT.